NFI Results

Estimates and standard error of the estimates

The results published in the NFI tables are estimates for variables in the Swiss forest (population parameters) whose true values are not known and must therefore be extrapolated (estimated) from the NFI sample data.

The extrapolations carry uncertainties. However, the accuracy of the extrapolations can be reliably estimated from the NFI sample, which is designed to be a random sample. To this end, all NFI tables include a second figure in addition to the estimate itself, namely the standard error of the estimate.

In most tables the percent standard error is reported (±%), but the absolute standard error (±) is also reported occasionally, especially for estimated percentages. The relationship between absolute and percent standard error is as follows:

percent standard error = absolute standard error / estimate × 100

absolute standard error = percent standard error × estimate / 100

Information on the forest road network is based on a full survey of all forest roads. In this case, there is no need to specify a standard error because there is no uncertainty caused by sampling.

Confidence interval of the estimate

With the estimate and the standard error of the estimate, the limits of the so-called confidence interval of the estimate can be calculated as:

lower limit = estimate – tQ × absolute standard error

upper limit = estimate + tQ × absolute standard error

If the simple standard error is used for the calculation (tQ = 1), then the 68% confidence interval is formed. In this case, the true value of the population parameter has a 68% probability of lying within this confidence interval of the estimate. If the double standard error is used (tQ = 2), then there is a 95% probability that the true value lies within this 95% confidence interval.

Significance of the estimate

The confidence interval can be used to statistically test whether the estimated population parameter is larger or smaller than a specific reference or target value, or whether two estimated population parameters truly differ (in the real population). For practical applications, proceed as follows: if a reference value lies outside the confidence interval, the estimated population value can be interpreted as being significantly different from it; if it lies within the confidence interval, the difference between the estimated population parameter and the reference value can be interpreted as random or not significant. When two population parameters are compared, they can be interpreted as differing significantly if their confidence intervals do not overlap.

Dealing with missing values

When calculating a results table, data are not always available for all combinations of characteristics^* of the classification variables and regional demarcation applied. In most cases, this indicates that the attribute estimated with the respective target variable does not occur or occurs only very rarely. Usually, the value 0 is used (imputed). However, as this value is not based on direct measurements, the associated standard error is represented with a full stop [.]. If the imputed value of 0 is referred to in the calculation, e.g. in the case of percentages or certain change estimates, no value can be entered. In this case, the estimated value and standard error are both represented with a full stop [.].

For example, no Arolla pines have been found and measured in the Swiss Plateau to date (growing stock of Arolla pines by production region). The values can be assumed to be missing because Arolla pine does not occur in the Swiss Plateau and therefore the growing stock there must be 0.

^* e.g. ‘Arolla pine’ characteristic of the classification variable ‘tree species’ and ‘Swiss plateau’ characteristic of the ‘regional demarcation’

Changes

There are two types of changes in the NFI:

The first type involves specific target variables relating to components of change, such as increment, fellings, mortality and losses. These target variables are only available for two consecutive inventory cycles, e.g. NFI3–NFI4. In the evaluation of components of change, the classification variable characteristic of the second inventory cycle is assigned to the first inventory cycle. These evaluations therefore do not take into account potential changes in a classification variable characteristic from the earlier to the later inventory (e.g. from private to public ownership).

With the second type of change, the difference in target variables, such as number of stems, growing stock or forest area, is used to assess the change between two inventory cycles. Target variables are generally used to represent states, such as that in NFI4, but can also indicate the net change between any two inventory cycles, e.g. NFI1–NFI4. In evaluations of change using these target variables, the change in a classification variable characteristic is considered in the analysis. Consequently, one can detect, for example, that the forest area without shrub forest increased between the two inventory cycles. This only has an effect on classification variables whose characteristic (class) can actually change, e.g. the affiliation with a forest area or the tree condition.

NFI4–NFI5
net increment
tree species (56 classes)
regional demarcation: protection forest region
unit: 1000 m³/yr
evaluation area: accessible forest without shrub forest NFI1-NFI5
grid: 1.4 km grid, subgrids 1-5
change 2009/17–2018/26
	protection forest region
	Jura + Plateau		Northwestern Alps		Northeastern Alps		Southwestern Alps		Southeastern Alps		Southern Alps		Switzerland
tree species (56 classes)	1000 m³/yr	±%	1000 m³/yr	±%	1000 m³/yr	±%	1000 m³/yr	±%	1000 m³/yr	±%	1000 m³/yr	±%	1000 m³/yr	±%
n/a	0	.	0	.	0	.	0	.	0	.	0	.	0	.
Abies alba	855	7	423	13	175	20	37	31	17	50	28	47	1536	6
Larix decidua, Larix kaempferi	32	35	11	49	4	58	82	25	77	22	78	31	283	13
Picea abies	942	8	562	10	403	14	162	25	482	14	100	38	2652	5
Pinus cembra	0	.	2	100	0	.	8	69	26	40	0	100	37	33
Pinus mugo subsp. uncinata	0	.	6	62	2	82	0	977	5	137	0	100	13	57
Pinus mugo subsp. mugo	0	.	0	100	0	72	0	100	-1	119	0	.	0	207
Pinus nigra	4	66	0	.	0	.	0	.	0	0	0	.	4	66
Pinus strobus	9	75	1	100	0	.	0	.	0	.	0	.	10	67
Pinus sylvestris	21	67	5	138	4	66	-3	287	28	42	-4	109	51	44
Pseudotsuga menziesii	58	26	1	100	0	.	0	.	0	.	2	100	61	25
Taxus baccata	12	34	1	65	3	80	0	100	0	.	0	100	16	30
other conifers	1	100	1	100	0	.	0	.	0	.	0	.	2	74
Acer campestre	4	35	1	76	0	100	0	89	0	89	0	100	5	31
Acer opalus	0	559	-1	132	0	.	0	70	0	.	0	.	0	989
Acer platanoides	7	129	0	2050	1	448	3	97	2	100	0	100	12	84
Acer pseudoplatanus	199	12	34	39	71	28	9	41	10	52	10	53	334	10
Aesculus hippocastanum	0	100	0	.	0	.	0	.	0	.	0	.	0	100
Alnus glutinosa	19	39	0	.	0	100	0	.	0	.	8	62	28	33
Alnus incana	-3	120	2	156	-5	104	-1	348	10	78	0	36359	3	322
Alnus viridis	0	.	0	.	0	.	0	.	0	.	0	.	0	.
Betula pendula	13	50	0	96	2	80	-2	127	2	113	-4	226	11	104
Betula pubescens	0	.	0	100	0	100	1	100	0	100	0	100	1	87
Carpinus betulus	17	36	0	0	0	71	0	100	0	.	0	390	18	35
Castanea sativa	0	100	0	100	0	.	1	64	0	89	3	940	4	630
Fagus sylvatica	821	7	179	18	157	19	-5	174	16	44	117	21	1287	6
Fraxinus excelsior	124	25	24	65	6	303	6	66	3	191	19	61	182	22
Fraxinus ornus	0	.	0	.	0	.	0	.	0	.	0	2232	0	2232
Ilex aquifolium	1	59	0	72	0	84	0	100	0	.	2	44	3	32
Juglans regia	1	73	0	64	0	.	0	100	1	160	0	100	3	53
Laburnum anagyroides	0	92	0	0	0	.	0	100	0	.	0	100	0	259
Malus sylvestris	0	100	0	100	0	.	0	.	0	.	0	0	0	464
Ostrya carpinifolia	0	.	0	.	0	.	0	.	0	.	2	252	2	252
Populus alba, Populus x canescens	6	100	2	100	0	.	0	100	0	.	0	.	9	79
Populus nigra s.l.	9	69	0	.	2	100	0	.	0	.	0	.	10	60
Populus (others)	-11	133	0	.	0	.	0	.	0	100	0	.	-11	134
Populus tremula	3	44	1	92	-1	100	0	1437	-6	67	7	234	5	336
Prunus avium	13	40	1	61	0	799	3	56	5	82	9	38	30	27
Prunus padus	4	49	0	.	0	.	0	.	0	100	0	.	4	47
Pyrus communis, Pyrus pyraster	0	100	0	.	0	.	0	100	0	.	0	.	0	101
Quercus cerris	0	.	0	.	0	.	0	.	0	.	2	74	2	74
Quercus petraea	35	34	3	104	0	1285	0	199	2	78	3	194	44	31
Quercus pubescens	1	167	0	.	0	.	4	53	0	.	1	225	6	61
Quercus robur	45	26	2	64	3	80	0	100	0	.	-7	74	44	30
Quercus rubra	9	93	0	.	0	.	0	.	0	.	0	.	9	93
Robinia pseudoacacia	2	73	0	.	0	.	-1	127	0	.	21	50	22	49
Salix (others)	15	35	-2	275	1	92	1	287	3	88	-1	272	17	60
Sorbus aria	3	41	0	620	0	320	2	34	-1	120	2	50	5	52
Sorbus aucuparia	0	1246	2	94	0	394	1	280	1	51	0	94	3	82
Sorbus torminalis	1	63	0	.	0	.	0	.	0	.	0	.	1	63
Tilia cordata	17	28	1	280	4	55	-1	103	-2	75	-6	159	12	95
Tilia platyphyllos	-2	198	1	110	3	57	5	76	1	100	0	100	8	71
Ulmus glabra	8	69	6	101	0	3333	0	.	-1	87	1	214	13	70
Ulmus minor	3	100	0	100	0	.	0	.	0	.	0	.	2	110
other broadleaves	1	80	-2	100	0	.	0	.	0	.	0	100	-1	202
other shrubs	0	296	0	208	-1	98	0	231	0	134	1	138	1	180
indeterminable	0	0	0	0	0	0	0	0	0	0	0	0	0	0
total	3295	4	1269	7	835	10	315	17	682	11	394	17	6794	3

Table citation

Abegg, M.; Ahles, P.; Allgaier Leuch, B.; Cioldi, F.; Didion, M.; Düggelin, C.; Fischer, C.; Herold, A.; Meile, R.; Rohner, B.; Rösler, E.; Speich, S.; Temperli, C.; Traub, B.,
2023: Swiss national forest inventory - Result table No. 1403624. Birmensdorf, Swiss Federal Research Institute WSL

back